Product specifications

Products category:
EBS-1500 Series Industrial INK-JET Printers (DOD, LCP)

Product name: Product symbol:
1500/00 Series 64-dot Electromagnetic Print-head P371xxxx






An electromagnetic print-head for EBS-1500 series printing systems. It contains a printing unit where nozzle valves are controlled with the application of electromagnetic transducers. The electromagnetic print-head has the following properties:
It is designed for making durable and legible prints on practically any material and a variety of types of surface, smooth, porous and also uneven surfaces of irregular shapes, such as pipes, bags, insulation sleeves, fabrics, extruded packing,
It can run as part of single-head or multi-head systems under the control of general-purpose controllers UPC EBS-1501(2) or UPC EBS-1506,
The print-heads can work with 1500/20 series piezoceramic print-heads as part of the a printing system controlled by the same controller,
It is equipped with a holder where a photo-detector of objects is installed and a guide rail to hold a minimum distance between the print-head and an object; both elements are installed on the right or left of the print-head according to the direction of object movement,
The print-heads can print with coloured dye or pigment-based inks, with each print-head using only one ink type,
Each print-head in the printing system can be supplied with its own ink supply system, thus offering an opportunity of using different inks, or it can be linked into a common ink-supply system,
For the principle of operation of the print-head see >>>
Parameter Value
Number of dots (nozzles) or maximum print height 64
Dot diameter 0.85 mm (for 120-µm nozzles)
Distance between dots in vertical direction 1.8 mm
Print height from 6 mm to 113.4 mm
Print height adjustment by turning the print-head
Maximum print rate 120 m/min - for: Resolution = 27 dots/dm,
60 m/min - for: Resolution = 55 dots/dm,
Intensity = 100
Distance between the print-head and an object from 2 to 20 mm
Ink type dye or pigment-coloured ink based on spirit or MEK
Ink consumption depends on many parameters, such as
ink pressure, number and diameter of nozzles, intensity, row print frequency, row repetition, coverage ratio, for example approx. 138 ml/h (for a nozzle diameter=120µm, Pressure=0.4 bar, Intensity=70, Repetition=1, Shift=10m/min, Text=letters and digits)
Clean compressed air supply.
Air pressure upstream of the regulator


from 0.1 to 1.0 MPa (from 1 to 10 bar)
Air pressure (working pressure) downstream from the regulator from 0.02 to 0.05 MPa not greater than 0.1 MPa (from 0.2 to 0.5 bar not greater than 1 bar)
Power supply input rating: DC 24 V;
maximum current consumption*): 3.41 A
*) In most cases the real current consumption is much smaller than the maximum, because it depends on print rate, intensity and coverage ratio, i.e. the number of dots printed in proportion to the maximum number of dots resulting from multiplying the print length (a number of rows) by the maximum print height.
Environment operating temperature:
from +5C to +40C as standard,
from -10C for special versions;
relative humidity:
up to 90% noncondensing
Dimensions width: 79 mm,
height: 159 mm,
length: 104 mm
Weight 1850 g
Dust and splash resistance standard IP40,
option IP56
Position of print-head during the printing any
Required inactive time none; the device can run uninterruptedly for 24 hours
Parameter Value
Number of dots (nozzles) or maximum print height 64
Dot diameter 0.85 mm (for 120-µm nozzles)
Distance between dots in vertical direction 1.8 mm
Print height from 6 mm to 113.4 mm
Print height adjustment by turning the print-head
Maximum print rate 120 m/min - for: Resolution = 27 dots/dm,
60 m/min - for: Resolution = 55 dots/dm,
Intensity = 100
Distance between the print-head and an object from 2 to 20 mm
Ink type dye or pigment-coloured ink based on spirit or MEK
Ink consumption depends on many parameters, such as
ink pressure, number and diameter of nozzles, intensity, row print frequency, row repetition, coverage ratio, for example approx. 138 ml/h (for a nozzle diameter=120µm, Pressure=0.4 bar, Intensity=70, Repetition=1, Shift=10m/min, Text=letters and digits)
Clean compressed air supply.
Air pressure upstream of the regulator


from 0.1 to 1.0 MPa (from 1 to 10 bar)
Air pressure (working pressure) downstream from the regulator from 0.02 to 0.05 MPa not greater than 0.1 MPa (from 0.2 to 0.5 bar not greater than 1 bar)
Power supply input rating: DC 24 V;
maximum current consumption*): 3.41 A
*) In most cases the real current consumption is much smaller than the maximum, because it depends on print rate, intensity and coverage ratio, i.e. the number of dots printed in proportion to the maximum number of dots resulting from multiplying the print length (a number of rows) by the maximum print height.
Environment operating temperature:
from +5C to +40C as standard,
from -10C for special versions;
relative humidity:
up to 90% noncondensing
Dimensions width: 79 mm,
height: 159 mm,
length: 104 mm
Weight 1850 g
Dust and splash resistance standard IP40,
option IP56
Position of print-head during the printing any
Required inactive time none; the device can run uninterruptedly for 24 hours